Philips BDP5012/F7 Blu-ray Player User Manual


 
31
SPECIAL PLAYBACK
EN
Some BD and DVD contain multiple audio streams. Those
are often in different audio languages or audio formats.
For BD, available audio varies depending on “Blu-ray Disc
Audio” setting. Refer to page 34 for more information.
1) During playback, press [AUDIO] repeatedly to
display “Primary” or “Secondary”.
2) Use [K / L] to select your desired audio stream
channel.
For “Secondary”, use [s / B] to switch between
current audio setting and “Off”.
3) Press [AUDIO] repeatedly to exit.
1) During playback, press [AUDIO].
2) Use [K / L] to select your desired audio stream
channel.
3) Press [AUDIO] to exit.
Some BD-video and DVD-video contain scenes which have
been shot simultaneously from various angles. You can
change the camera angle when appears on the TV
screen.
1) During playback, press [ANGLE].
The selected angle will be displayed on the display
bar at the top of the TV screen.
2) Use [K / L] to select your desired angle.
Switching Audio Soundtrack
“Primary” : Sets the audio for the primary video.
“Secondary” : Sets the audio for the secondary video.
2
Primary
English
Dolby Digital
Multi
2
Audio English Dolby Digital Multi
e.g.) DVD-video
Note
The secondary audio will not be output when the
secondary video is not displayed or when “Blu-ray
Disc Audio” is set to “Primary Audio Only”. (For some
BD, secondary audio will be output even when
secondary video is off.)
The sound mode cannot be changed during
playback of discs not recorded in multiple audio.
Some discs allow changing the audio language
setting on the disc menu. (Operation varies
depending on the discs. Refer to the manual
accompanying the disc.)
[AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
If the disc has no audio language, “Not Available” will
be displayed on the TV screen.
For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
Switching Camera Angles
Note
If “Angle Icon” setting is set to “Off”, will not
appear on the TV screen. (refer to page 35)
1 / 5
Angle
Introduction Connections Basic Setup Playback OthersFunction Setup