Philips BDP5510 Blu-ray Player User Manual


 
22 EN
 Constant bit rate:
 MP3: 112 kbps - 320 kpbs
 
USB
 Compatibility: Hi-Speed USB (2.0)
 Class support: USB Mass Storage Class
 File system: FAT16, FAT32
 USB port: 5V
, 500mA (for each port)
 Support HDD (a portable hard disc drive):
an external power source may be needed.
Main unit
 Power supply rating: AC 220-240V~, 50 Hz
 
 Power consumption in standby mode (fast

 Dimensions (w x h x d): 435 x 38 x 212.7
(mm)
 
Accessories supplied
 Remote control and 2 AAA batteries
 User manual
 CD-ROM built in multi-lingual user manual
(Continental Europe only)

 Laser Type (Diode): AlGaInN (BD), AlGaInP
(DVD/CD)
 
664nm (DVD), 784 ~ 796nm (CD)
 

6 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the

Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this player do not work.
 Disconnect this player from the power
supply for a few minutes, and then
reconnect.
Picture
No picture.
 Make sure that the TV is switched to the
correct source input for this player.
 For the composite connection (via the
VIDEO connector) to the TV, on this player
select a video resolution of 480i/576i or
480p/576p to enable video output (press
, and select [Setup] > [Video] > [HDMI
video]) .
No picture on HDMI connection.
 Make sure that the HDMI cable is not
faulty. If it is faulty, replace with a new
HDMI cable.