Filter
Top Products
47
LIST OF SETTINGS
EN
EN
Category Menus / Options Description
Video
Output
De-interlacing Mode Auto “Auto”:
Automatically detects film or video
content, and appropriately converts it.
“Video”:
Select this option when the picture is
distorted when using “Auto”.
Video
Black Level
On Adjusts brightness to compensate for
ambient room light.
Off
HD Noise Reduction On Reduces noise of the playback picture.
“On”:
Activates Noise Reduction.
“Off”:
Deactivates Noise Reduction.
Off
Audio Night Mode
Auto Compresses range between soft and
loud sounds.
“Auto”:
Night Mode will be activated
automatically when Dolby TrueHD
audio is played back.
“On”:
Activates the Night Mode.
“Off”:
Deactivates the Night Mode.
On
Off
Down Sampling
On Sets the sampling rate for outputting
PCM audio from the digital output
(coaxial).
“On”:
Over 96 kHz PCM audio will be down
sampled at 48 kHz.
“Off”:
For BD or DVD recorded in LPCM
without copyright protection,
2-channel audio signals up to 96 kHz
are output as LPCM signals.
Off
Virtual Surround On Select “On” to enjoy stereophonic
virtual space through your existing 2
channel stereo system during
playback of BD-video or DVD-video.
Off
Blu-ray Disc Audio
Mix Audio Output “Mix Audio Output”:
The audio for the secondary video and
the interactive application will be
output together with the audio for the
primary video.
“Primary Audio Only”:
Only audio for the primary video will
be output.
When playing back a BD-video which
only contains primary audio, the
audio output will be the same case as
“Primary Audio Only” even if the “Blu-
ray Disc Audio” is set to “Mix Audio
Output”.
Primary Audio Only
Introduction Connections Basic Setup Playback OthersFunction Setup