Filter
Top Products
19
I
f you have connected the TV’s AUDIO
OUTPUT jacks to the AUDIO INPUT jacks
on a stereo receiver, set AUDIO OUT to
either VARIABLE or FIXED to determine
whether you adjust the volume at the stereo
or at the TV. If you select VARIABLE, change
the volume at the TV using the TV’s remote
control. If you select FIXED, adjust the vol-
ume at the stereo using the stereo’s controls.
To select FIXED or VARIABLE, follow these
steps.
1
Press the MENU button on the
remote control to show the onscreen
menu.
2
Press the CURSOR DOWN button
once to highlight SOUND.
3
Press the CURSOR RIGHT button
and the menu will shift to the left.
TREBLE will be highlighted and an
adjustment bar will be shown to the
right.
4
Press the CURSOR DOWN button
repeatedly until AUDIO OUT is high-
lighted.
5
Press the CURSOR RIGHT or CUR-
SOR LEFT button to select FIXED or
VARIABLE.
6
Press the STATUS/EXIT button to
remove the menu from the screen.
HOW TO USE THE AUDIO OUT CONTROL
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
AVL
INCR. SURROUND
STEREO
SAP
AUDIO OUT FIXED
SOUND
3,5
1
6
5
2,4
OR
AVL
INCR. SURROUND
STEREO
SAP
AUDIO OUT VARIABLE
SOUND
TREBLE 30
BASS
BALANCE
AVL
INCR. SURROUND
SOUND
FIXED – If FIXED is selected, the sound
coming from the TV and being heard
through an external audio system is not
adjustable with the television’s volume
controls. The volume would have to be
adjusted at the audio system.
VARIABLE – If VARIABLE is selected,
the sound coming from the TV and being
heard through an external audio system can
be adjusted at the TV using the Volume +
or – buttons on the television or remote
control.
HELPFUL
HINT