Filter
Top Products
30
A
fter your personal access code has been
set (see the previous page), you are ready
to select the channels or inputs you want to
block out or censor.
1
Press the MENU button on the
remote control to show the onscreen
menu.
2
Press the CURSOR DOWN button
twice to highlight FEATURES.
3
Press the CURSOR RIGHT button
and the menu will shift to the left.
4
Press the CURSOR DOWN button
once to highlight the AutoLock™ con-
trol.
5
Press the CURSOR RIGHT button
again to highlight ACCESS CODE.
6
Enter your four-digit ACCESS
CODE. CORRECT will flash very
briefly and the menu will move to the
left with BLOCK CHANNEL high-
lighted.
7
Press the CURSOR RIGHT button
to highlight the TV’s available chan-
nels.
8
Press the CURSOR UP or CURSOR
DOWN button to highlight the chan-
nel you want to block.
9
Press the CURSOR RIGHT button
to block the channel. A padlock image
appears to the right of the channel
number.
Repeat steps 7 and 8 for any channels you
want to block from viewing.
Press the STATUS/EXIT button to
remove the menu from the screen.
HOW TO BLOCK CHANNEL USING AUTOLOCK™
PICTURE
SOUND
FEATURES
INSTALL
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
FEATURES
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
FEATURES
ACCESS CODE
- - - -
AutoLock
FEATURES
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
12
13
14
15
16
AutoLock
FEATURES
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
12
13
14
15
16
Channel 12
Blocked by AutoLock
CHANNEL BLOCKING
Access code
- - - -
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
FEATURES
ACCESS CODE
- - - -
10
2
4
8
3
5
7
9
6
1
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
FEATURES
ACCESS CODE
X X X X
AutoLock
AV2
AV3
ALL
1
2
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
8
Remember that 0711 is the default
AutoLock
TM
code. If your access code has
been changed by someone other than you (a
child, for example) or you have forgotten the
code, you can always get in by inputting the
default code.
NOTE: You also can block out the use of the
A/V external inputs on the rear of the TV. This
stops the viewing of VCR, DVD, and other
sources that can be shown through the A/V input
jacks. Select AV1, CVI, AV2, SIDE (AV3), or
AV4; and then select BLOCK.
H
ELPFUL HINT
10
If a channel is blocked by the
BLOCK CHANNEL option,
the TV will display the screen
shown to the right. To watch
the channel, enter your access
code or change the BLOCK
CHANNEL option back to off.