Filter
Top Products
57
RQT9428
With Other
Equipment
Recording broadcasts from external equipment
HDD
See also “Important notes for recording” (➡ 28)
e.g., Connecting to the AV2 terminals on the front
Turn off the unit and external equipment before connecting.
L/MONO - AUDIO- R
VIDEO
S VIDEO
AV2 IN
Connect to Audio/Video output terminals.
External equipment
Audio/Video
cable
S Video
cable
This unit
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
Preparation
Press [DRIVE SELECT] to select the HDD drive.
When the output signal from the external equipment is NTSC,
change “TV System” to “NTSC” in the Setup menu (➡ 92).
1 While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV2 input terminals, select
“AV2”.
2 Press [REC MODE] to select the
recording mode.
DR, HG, HX, HE, HL, FR mode cannot be selected.
3 Select the channel on the other
equipment.
4 Press [
*
REC].
Recording starts.
To skip unwanted parts
Press [
h
] to pause recording. (Press again to restart recording.)
To stop recording
Press [
g
].
Copying
DMR-BW850GL_en.indb 57DMR-BW850GL_en.indb 57 2009/04/08 午前 10:01:072009/04/08 午前 10:01:07