Filter
Top Products
26 MENU
7.4 Parental Control
Parental Control is used to:
- Block access to your receiver and its Menu;
- Specify a parental rate to protect access to programmes
using a PIN code in case the parental rate transmitted
with such programmes is higher than the rate you set;
- Enable channel lock using a Pin Code in order to prevent
children from watching these channels.
You must enter your 4-digit Pin Code to access the
various settings.
7.4.1 To enable Menu Lock
To lock access to every sub-menu of your receiver, set Menu
Lock to ON.
7.4.2 To set the Parental Rate
Select the desired Parental Rate:
from 3 to
18, or None.
7.4.3 To change your receiver's Pin Code
The receiver's Pin Code default value is 1111.
To change your Pin Code:
- Scroll down to New Pin Code and enter your new Pin Code.
- Scroll down to Confirm Pin Code and enter your new
Pin Code again.
Note: once you have changed your Pin Code, keep it secret to
prevent others from using it. If you forget or lose your Pin Code,
please refer to the Troubleshooting chapter.
- Press <OK> to confirm your changes and exit the screen.
7.5
Timer Manager
The Timer Manager is used to set:
- Recording timers for the programmes you want to
r
ecor
dusing your VCR or DVD recorder,
- Reminders for programmes you want to see in the near future,
- Sleep timers.
English
Doc_DSR300.qxd 29/11/04 13:19 Page 26