Filter
Top Products
English
10
Optional : Connecting to an
Audio System
COAXIAL
L
R
TV OUT
VIDEO
LEFT
AUDIO IN
RIGHT
AUDIO IN
STEREO
TO STEREO
AUDIO IN
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In, Video In, Composite or Baseband)
on the TV (cable not supplied).
2 Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
Connections
Optional : Connecting Digital AV
Receiver
COAXIAL
L
R
TV OUT
VIDEO
AV Receiver
COAXIAL IN
TO Digital AV Receiver
DIGITAL AUDIO IN
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1 Select one of the video connections
(CVBS VIDEO IN or SCART jack (TV
OUT) depending on the options available
on your TV.
2 Connect the COAXIAL jack of the DVD
Player to the corresponding COAXIAL
Digital Audio In jack on your Receiver
(cable not supplied).
3 Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 25
“Digital Output”).
Helpful Hint:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.