Filter
Top Products
English
17
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load
the disc.
To select a playback feature or item
● Use the 1 2 3 4 or numeric keypad
(0-9) on the Remote Control, then press
PLAY B to start playback.
To access or remove the menu
● Press DISC MENU on the Remote
Control.
Symbols Used in this Manual
The below symbols appear in some
headings and notes with the following
meanings:
DVD
VCD
CD
– Description refers to playback of DVD-video discs
– Description refers to playback of Video CDs
– Description refers to playback of Audio CDs
– Description refers to playback of MP3 files
MP3
JPEG
– Description refers to playback of JPG files
DivX
– Description refers to playback of DivX files
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
DVD
VCD
CD
MP3
DivX
JPEG
1 During playback, press PAUSE ;.
➜Playback will pause and sound will be
muted.
2 Press PAUSE ; again to select the
previous or next picture frame.
3 To return to normal playback, press
PLAY B.
Selecting track/chapter
DVD
VCD
CD
1 Press and hold T / S, then press B
to resume normal playback.
➜While searching, pressing T / S
again will decrease/increase the search
speed.
Mute
1 Press MUTE repeatedly to disable and
enable the sound output.
Resuming playback from the last
stopped point
DVD
VCD
Resume playback of the last 5 discs is
possible, even if the disc was ejected or
the power switched off.
● Load one of the last 5 discs.
➜ “LOADING” appears.
● Press PLAY B and the disc will be
played back from the last point.
To cancel resume mode
● In stop mode, press STOP 9 again.
Helpful Hint:
– Resume option may not be available on
some discs.
Disc Operations