Filter
Top Products
40
Setting Up the VCR Plus+ Programming System
1
First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the
VCR Plus+ programming system to work properly.
Since the channel numbers of the stations you receive may not be the same as the station numbers,
and since channel numbers differ from area to area, you must program the VCR with your local
channel information.To fill in the boxes, you will need 1) a cable channel list, if applicable (you can
request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers (Guide
channels), which you can find in your TV guide or the TV listings of your local newspaper.
NOTE: If you are using a Cable Box/DBS, the User channel must be 3 or 4 (the Cable
Box/DBS output channel) for every Guide channel.
Channels
Station
Call Letters
GUIDE CH.
USER CH.
Channels
Station
Call Letters
GUIDE CH.
USER CH.
H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 40