Philips DVD755VR/00 DVD VCR Combo User Manual


 
English
10
Connections
Tips
Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
unit.
Please refer to the manuals of your TV, Stereo System or
other devices as necessary to make the best connections.
For better sound reproduction, connect this unit’s AUDIO
OUT jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See “Connecting to
optional equipment” on page 11.
Caution
Make sure this unit is connected directly to the TV. Set the
TV to the correct video input channel.
Do not connect this unit’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting to a TV & Decoder
Make one of the following connections, depending on the
capabilities of your existing equipment.
Basic connection (AV)
1
Connect the EURO AV1 AUDIO/VIDEO on the rear
panel of this unit to the SCART input socket on the TV
using a SCART lead.
2
Some TV broadcasters transmit encoded television signals
which you can only see with a purchased or rented
decoder.You can connect such a decoder (descrambler) to
the DVD+VCR.
Basic connection (RF)
1
Connect the RF antenna cable from your indoor/ outdoor
antenna to AERIAL jack on the rear panel of this unit.
2
Connect the supplied RF antenna cable from the RF OUT
(DVD/VCR OUT) jack on the rear panel of this unit to
your television’s Antenna Input.
AUDIO
OUT
DVD
EXCLUSIVE
OUT
VCR IN+OUT/DVD OUT
DVD/VCR
OUT
RF OUT
AERIAL
R
COAXIAL
L
DVD/VCR
AUDIO OUT
R
L
EURO AV1
AUDIO/
VIDEO
EURO AV2
DECODER