Filter
Top Products
English
29
Recording (continued)
TIPS: Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R
on another player, nalise the disc. See “Playing your recordings (DVD±R) on other DVD players”.
Timer recording (VIDEO
Plus+
®
System)
This is a simple programming system for
recorders. To use it, enter the PlusCode
programming number associated with
your television programme. You can nd
this number in your TV listings magazine.
All the information needed by the
recorder for programming is contained in
the programming number.
A
Switch on the TV set. Select the correct
Video In channel on the TV.
B
Press TIMER on the remote control.
The timer schedule appears.
1
2
3
4
5
6
Source RecMode Date Start End
Timer Schedule
VPS/PDC
C
Press OK to con rm.
Alternatively, press T key to go to the
next available empty slot and press OK.
The VIDEO Plus+
®
system menu
appears.
VIDEO Plus+ System
OK
CancelConfirm
Enter the PlusCode programming
number for the show you wish to
record or select CANCEL for manual
timer recording. To go back to timer
schedule press [RETURN].
D
Use the numeric keypad 0-9 to enter
the PlusCode programming number for
the show you wish to record.
(e.g. : 5-312-4 or 5,312 4, key in ‘53124’).
To clear the PlusCode programming
number, press CLEAR on the remote
control.
To cancel the VIDEO Plus+
®
programming, use ST keys to select
CANCEL
in the menu and press OK.
E
To con rm your entry, select
CONFIRM
in
the menu and press OK.
The system will store the timer entry
and return to the timer editor menu.
If the channel number of the TV channel
has not been assigned to the
programming number, you will have to
manually key in the channel number that
is assigned to the VIDEO Plus+
®
code.
Follow the instructions on the TV.
F
Press TIMER to exit the menu.
G
Insert a DVD±R/±RW into the recorder.
H
Press STANDBY-ON to switch the
recorder to standby mode.
If the recorder is not in standby mode,
a warning message will appear three
minutes before the recording starts.
The ‘TIMER’ icon will light up on the
display panel if a timer recording is set.