Filter
Top Products
English
54
DVD System Menu Options (continued)
CHANNEL SETUP settings (continued)
Channel
Scan mode
Frequency
TV System
NICAM
Audio
OK
Frequency
PAL B/G
Name
On
OK
DUAL A
Off
Skip
Fine-tune
P001/Ch003
55.26MHz
Cancel
Decoder
No
Modify Channel
Information
{ Audio } – For bilingual TV programmes, you can switch
between stereo (original) and additional audio
language.
– Use ST keys to select { DUAL A } or
{ DUAL B }, then press OK to con rm.
{ Decoder } – If you have connected the recorder with an
external decoder, set it to { On } and press
OK to con rm.
{ Skip } – Select this to set the channel to be skipped.
The skipped channels can only be accessed by
pressing the corresponding number key on
the remote control.
– Use ST keys to choose { Yes } if you wish to
skip this channel, then press OK to con rm.
{ Fine-Tune } – Select this to ne-tune the TV channel
manually if the reception is poor.
– Use WX keys to adjust the frequency.
3) To con rm all settings, select
OK
and press OK.
Sort Channels Rearrange all stored TV channels.
1) Use ST keys to highlight { Sort Channels } and press OK.
The list of TV channel programmes appears.
2) Use ST keys to highlight the channel you want to change and press
OK.
The selected channel will move to the right side of the screen.
3) Use ST keys to shift the TV channel to the desired position and
press OK again.
The selected channel will be inserted before the current position.
4) Repeat steps
B
~
C
until you have sorted all the TV channels you
want.
5) Press RETURN on the remote control to go back to the previous
menu.
Sort Channels
P001
P002
P003
P004
P005
P006
P007
P008
BC020
SW006
CH008
CH004
GG006
CH010
CH012
CH005
Skip
Unskip
Unskip
Unskip
Skip
Unskip
Unskip
Unskip
P003 CH008 Unskip