Filter
Top Products
English
53
DVD System Menu Options (continued)
CHANNEL SETUP settings
Channel Search Automatically scan all the receivable analogue local TV
channels and store these channels on the recorder.
Use ST keys to highlight { Channel Search } and press OK.
The automatic TV channel search starts. This process may take
several minutes. Once complete, the total number of channels found
and stored appears on the TV.
Modify Channel Adjust a stored TV channel to your preference, improve the
Information reception and the sound quality of that TV channel.
1) Use ST keys to highlight { Modify Channel Information } and
press OK.
The channel menu appears.
2) Use ST keys to select one of the options.
{ Name } – You can use the numeric keypad 0-9 to select
the channel preset number which you wish to
change.
– Use STkeys to change alphabet/ number and
use WX keys to select different entry elds, then
press OK to con rm.
{ Scan Mode } – Select TV channel search mode based on
channel allocation or frequency.
– Use ST keys to select { Frequency },
{ Channel } or { S-Channel } (Special Channel),
then press OK to con rm.
{ Frequency } – Shows the frequency of the current TV
channel.
– If required, use WX keys to start the automatic
frequency search and press OK to con rm.
{ TV System } – Set the TV system that produces the least
distortion of picture and sound.
– Use ST keys to select a suitable sound mode,
then press OK to con rm. (See chapter “TV
System Guide” at the back of this manual for
more information).
{ NICAM } – Turn on or off the digital sound transmission
system which improves the sound quality of the
TV channel.
– Use ST keys to select { On } or { Off }, then
press OK to con rm.
System Menu - Channel Setup
Modify Channel Information
Sort Channels
Channel Search
Search
Edit
Sort
Channel
Scan mode
Frequency
TV System
NICAM
Audio
OK
Frequency
PAL B/G
Name
On
OK
DUAL A
Off
Skip
Fine-tune
P001/Ch003
55.26MHz
Cancel
Decoder
No