Filter
Top Products
English
32 RECORDING
l If desired, select recording at daily or weekly
intervals in the field ‘
Date
’ with SELECT. Select
‘
Mo
-
Fr
’ for recording to be made from Mondays to
Fridays inclusive. Select an individual day of the week
for recording at weekly intervals on the same day of
the week.
l Press u (right cursor).
l Enter the programme number from which you want
to record. If you want to record from an external
source, select ‘
EXT1
’, ‘
EXT2
’, ‘
EXT3
’, ‘
EXT4
’, ‘
CAM1
’,
‘
CAM2
’ or ‘
CAM3
’ with vw (up down cursor).
l Press u (right cursor).
l Enter the Start time with vw (up down cursor) or
the digit keys 0-9.
l After entering the Start time, use SELECT to
switch VPS/PDC on or off. With most TV stations
the VPS/PDC time is always the same as the start
time.
‰ When VPS/PDC is switched on, the start time is
marked with an asterisk.
l Press u (right cursor).
l Enter the End time with vw (up down cursor) or
the digit keys 0-9.
l Use SELECT to choose the recording mode.
l If you made a mistake, you can go back with t (left
cursor).
l Confirm with OK .
‰ The data has been stored in a timer block.
l To end, press TIMER .
‰ Make sure that you inserted a disc without write
protection. If you inserted a write-protected
(locked) disc, recording will be refused.
l Switch off with B STANDBY/ON.
Programming with ’NEXTVIEW Link’
This DVD recorder is equipped with the function
’NEXTVIEW Link’. If your television is also equipped with
this function, you can mark TV programmes on the
television for programming. These TV programmes will
automatically be transmitted to a timer block on the
DVD recorder. If you clear the marking of the TV
programme on the television, the corresponding timer
block on the DVD recorder will also be cleared.
For more information, read the instruction manual of
your TV set.
If a timer setting is incorrect
The following warnings can be displayed in the timer
menu:
Collision
recording programme overlaps with another recording
programme.
Solution:
l Ignore by pressing TIMER. The programme with
the earlier start time will be recorded completely
before the later programme starts.
l Edit one or both timers.
l Delete one of the recording programmes.
Please enter programme number
The VIDEO Plus+ system does not recognize the TV
channel.
Solution:
l Select the required programme number (programme
name) with t or u (left right cursor).
l Confirm with OK.
PlusCode number wrong
You entered an incorrect PlusCode number or the
incorrect date.
Solution:
l Repeat the entry or end by pressing TIMER.
Weekend programming
-
not possible
Date was incorrectly entered. Daily programming can
only be used for recordings to be made from Mondays
to Fridays inclusive.
Memory full
The maximum number of recording programmes is used.
Solution:
l Delete one of the recording programmes.
Timer
Timer programming
Date
09 N E D 1 09: 35 11: 35 S P
Prog. Start
VPS
PDC End
Rec
Mode
Mo Fr Weekly
Press SELECT
To store
Press OK
06DVDR990UKD4 06-06-2002 14:57 Pagina 32