Filter
Top Products
7
Connect to digital amplifi er/receiver
1 Connect a coaxial cable (not supplied) to the
COAXIAL/DIGITAL OUT jack on this DVD
player and the COAXIAL/DIGITAL input jack
on the device.
Tip
You can optimize the audio output (see chapter ‘Adjust •
settings’ - [Audio Setup] > [Digital Output]) for details.
Connect to analog stereo system
1 Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD player
and the audio input jacks on the device.
Connect to power outlet
Warning
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage printed on the back
or the underside of the DVD player.
1 Connect the power cord to the power outlet.
The DVD player is ready to be set up for »
use.
DIGITAL IN
COAXIAL
DIGITAL
OUT
AUDIO IN
Tip
The component video input jacks on the TV may be •
labeled as Y Pb/Cb Pr/Cr or YUV.
This type of connection provides good picture quality.
•
Option 2 : Connect to video (CVBS) jack
1 Connect a composite video cable (supplied) to
the TV OUT jack on this DVD player and the
video input jack on the TV.
Tip
The video input jack on the TV may be labeled as A/V •
IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connection provides standard picture
•
quality.
Connect audio cables
Connect the audio from this DVD player to the TV
to allow sound output through the TV.
1 Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD player
and the audio input jacks on the TV.
Route audio to other devices
Route the audio from this DVD player to other
devices to enhance audio play.
VIDEO IN
AUDIO IN
English
EN