Filter
Top Products
9
5 Play
Play from disc
Note
DVDs and DVD players are designed with regional •
restrictions. Ensure that the DVD video you play is for
the same region zone as your player (indicated on its
back).
The DVD player can support play of the following fi le
•
formats: MP3/WMA/JPEG.
To play DVD-R, DVD+R or DVD-RW, the disc must be
•
fi nalized.
Play a disc
Caution
Never place any objects other than discs into the disc •
compartment.
1 Press to open the disc compartment.
2 Insert a disc with its label facing up.
For double-sided discs, load the playing •
side facing up.
3 Press to close the disc compartment.
To view disc play, turn on the TV to the •
correct viewing channel for this DVD
player.
If play does not start automatically, press •
.
4 To stop disc play, press .
Tip
If the password entry menu is displayed, you have to •
enter the password before it can be played.
If you pause or stop a disc for about 5 minutes, the
•
screen saver activates. To deactivate the screen saver,
press DISC MENU.
After you pause or stop a disc and no buttons are
•
pressed within 15 minutes, this DVD player automatically
switches to standby mode.
Play video
Note
For video disc, play always resumes from the point where •
it was last stopped. To start play from the beginning,
press
while the message is displayed.
Tip
You can set the default language for DVD audio and disc •
menu, see chapter ‘Adjust settings’ - [Preferences] for
details.
Turn on Progressive Scan
Connect a progressive scan TV with component video
jacks (see chapter ‘Connect video cables - Option 1:
Connect to component video jacks’ for details).
1 Turn on the TV to the correct viewing channel
for this DVD player.
2 Press SETUP.
3 Press to select [Video Setup].
4 Select [Component Video] > [P-Scan], then
press OK.
A warning message is displayed.»
5 To proceed, select [Yes] and press OK.
The progressive setup is complete.»
Note
If a blank/distorted screen is displayed, wait for 15 •
seconds for the auto recover.
If no picture displayed, turn off the progressive
•
scan mode as follows: 1) Press to open the disc
compartment. 2) Press the Numeric button ‘1’.
6 Press SETUP to exit the menu.
7 You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
During play, when progressive scan mode is on for •
both this DVP player and the TV, distorted picture may
display. Turn off the progressive scan feature on both this
DVD player and the TV.
Video Setup
Component Video
TV Display
TV System
Picture Setting
Interlaced
P-Scan
English
EN