Filter
Top Products
English
10 Hookups (cont’d)
D GITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
L
R
L
R
DEO
UT
COMPONNT
VID UT
Y
C
B /
PB
AUDIO O
DVD VCR
VCR
V DEO OUT
V DEO IN
/
AUDIO IN
S-VIDEO IN
L
Back of TV
Audio and
Video IN Jacks
on TV
Audio Cable
(supplied)
Video Cable
(supplied)
AUDIO
OUT
DVD
L
R
S V DEO
OUT
COMPONENT
VIDEO OUT
Y
C
B
P
B
C
R
P
R
AUDIO IN
Y
Cb/Pb
Cr/Pr
COMPONENT
VIDEO IN
L
R
Back of TV
AUD O
OUT
DVD
L
R
S VIDEO
OUT
COMPONENT
V DEO OUT
P
B
P
R
AUDIO IN
VIDEO IN
L
R
1
1
1
2
b
2
c
2
a
1
Connect the red and white audio cable (supplied) to
the red and white DVD or DVD/VCR AUDIO OUT
jacks on the DVD/VCR and to the red and white
AUDIO IN jacks on the TV.
● If you are using DVD/VCR AUDIO OUT jacks for your
audio connection,use 2a method for your video connection.
If you are using DVD AUDIO OUT jacks for your audio
connection,use 2b or 2c method for your video connection.
2
a
Connect the yellow video cable (supplied) to the
DVD/VCR VIDEO OUT jack on the DVD/VCR and
to the VIDEO IN jack on the TV. TheVIDEO IN jack on
the TV is usual
ly yellow and may be labeled CVBS,
Composite or Baseband video.
2
b
Connect component video cable (not supplied) to
the COMPONENT VIDEO OUT jacks on the
DVD/VCR and to the COMPONENT VIDEO IN
jacks on the TV. The Co
mponent Video In jacks on the
TV are usually red,blue and green.
2
c
Connect an S-Video cable (not supplied) to the
S-VIDEO OUT jack on the DVD/VCR and to the
S-VIDEO IN jack on the TV.
3
Connect the power cords of the TV and the
DVD/VCR to a power outlet. Turn on the TV and set
it to the correct Video In channel.
If you are using the yellow video cable for VCR playback,choose
the Video In channel at your TV. To find the correct Video In
channel,go to your lowest TV channel and change channels
downward until you see VCR playback on the TV screen.To help
you find the right Video In channel,turn on the DVD/VCR.Press
DVD to put the DVD/VCR in DVD mode. With no disc in the
player,a large DVD Video logo will appear on the TV screen when
you get the TV on the correct Video In channel.
4
You are ready to turn on the DVD/VCR. Go to page
14 to complete the first-time setup.
DVD/VCR to a TV that has Audio/ V
ideo, Component Video or S-Video In
jacks
• Match the cable colors to the
jack colors.If the TV has a single
AUDIO IN jack,use the white
audio cable to connect the
DVD/VCR’s white AUDIO OUT
(left) jack to the TV’s AUDIO IN
jack.You will not use the red
cable.Or,purchase a “splitter”
audio cable to go from the
left/right AUDIO OUT jacks of
the DVD/VCR to the TV’s single
AUDIO IN jack.
Helpful Hint