Filter
Top Products
24
English
Getting Started (continued)
Setting the speakers’
channels
You can adjust the delay times (center
and surround only) and volume level for
individual speakers. These adjustments let
you optimize the sound according to
your surroundings and setup.
Before you start...
Stop the disc playback by pressing STOP
button twice or remove the disc from
the disc tray. Otherwise, the settings are
not accessible.
A In disc mode, press SETUP on the
remote control.
B Press
repeatedly to select { Audio
Setup Page. }
C Press to highlight { Speakers
Volume } and press
.
Audio Setup Page
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling
Audio Sync
Front Left
Front Right
Center
Subwoofer
Rear Left
Rear Right
0dB
0dB
0dB
0dB
0dB
0dB
Speakers Level Setup
D Use keys to set the volume level for
each speaker (-6dB ~ +6dB) and press
OK to con rm.
E Use keys to highlight { Speakers
Delay } and press
.
Audio Setup Page
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling
Audio Sync
Center
Rear Left
Rear Right
Speakers Distance Setup
0ms
0ms
0ms
F Use keys to set the delay times
(0 ms ~ 15 ms) for centre and rear
speakers that best suit your surround
sound needs.
G Press OK to con rm.
Helpful Hints:
– A 1ms increase/decrease of delay time is
equivalent to 30 cm change in distance.
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
– The test tone will be automatically
generated to help you judge the sound level
of each speaker.
1_hts3545_37_eng2.indd 241_hts3545_37_eng2.indd 24 2007-04-26 2:45:38 PM2007-04-26 2:45:38 PM