Philips HTS3565/78 DVD Player User Manual


 
23
English
Getting Started (continued)
Setting the speakers’
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to
your surroundings and setup.
Before you start...
Stop the disc playback by pressing Ç
twice or remove the disc from the disc
tray. Otherwise, the settings are not
accessible.
A In disc mode, press OPTIONS on the
remote control.
B Press repeatedly to select { Audio
Setup } icon, then press .
C Select { Speakers Volume } and press
.
Press OPTIONS to exit menu
Audio Setup
Front Left
Front Right
Center
Subwoofer
Rear Left
Rear Right
0dB
0dB
0dB
0dB
0dB
0dB
Speakers Level Setup
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling
Audio Sync
D Use keys to set the volume level for
each speaker (-6dB ~ +6dB) and press
OK to con rm.
E Use  keys to highlight { Speakers
Delay } and press
.
Press OPTIONS to exit menu
Audio Setup
Center
Rear Left
Rear Right
Speakers Distance Setup
0ms
0ms
0ms
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling
Audio Sync
F Use keys to set the delay times
(0 ms ~ 15 ms) for centre and rear
speakers that best suit your surround
sound needs.
G Press OK to con rm.
Helpful Hints:
– A 1ms increase/decrease of delay time is
equivalent to 30 cm change in distance.
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
– The test tone will be generated to help you
judge the sound level of each speaker.
1_hts3565_78_eng1.indd 231_hts3565_78_eng1.indd 23 10/14/2008 4:56:52 PM10/14/2008 4:56:52 PM