Filter
Top Products
29
English
Disc operations (continued)
Playing a disc
A Press the SOURCE button until “DISC”
appears on the display panel.
B Turn on the TV power and set to the
correct Video In channel. (See section
“Finding the correct viewing channel”.)
You should see the blue DVD
background screen on the TV.
C Insert a disc into the disc slot.
Make sure the disc label is facing out.
For double-sided discs, load the side you
want to play facing out.
When loading an 8cm disc, slot into
the middle of the disc loader.
(EJECT)
D Playback will start automatically.
If a disc menu shows on the TV, see
page 30 “Using the Disc Menu.”
If the disc is locked by parental
control, you must enter your six-digit
password (see page 45.)
E To remove the disc, press ç(EJECT) or
press and hold the Ç button on the
remote control.
Basic playback controls
Pausing playback
During playback, press u (PLAY
PAUSE ) or Å on the remote control.
To resume playback, press u again
(or PLAY X on the remote control.)
Selecting another track/chapter
Press ./ > (PREV / NEXT) or use
the numeric keypad (0-9) to key in a
track/chapter number.
If the repeat track mode is active, press
. again to replay the same track/
chapter.
Searching backward/forward
Press and hold ./ > (PREV / NEXT.)
While searching, press ./ >
repeatedly to decrease/increase the
search speed.
To resume normal playback, press
u (or PLAY X on the remote
control.)
Stopping playback
Press Ç(STOP.)
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.