Filter
Top Products
53
English
No HDMI audio output.
No HDMI video output.
There is interference on your
HTS9800W rear speakers or
existing wireless network in your
home.
– You will not hear any sound from the HDMI output if the
source device is only DVI/HDCP (High-bandwidth Digital
Content Protection)-compatible.
– It is not possible to output SACD or copy-controlled DVD-
Audio sources from the HDMI connection.
– HDMI connection can only be made to HDMI-equipped
devices with HDCP (High Bandwidth Digital Content
Protection.) If you wish to connect to a DVI connector
(equipped with HDCP,) you will need a separate adaptor
(DVI to HDMI.)
– Make sure the resolution of this DVD system matches the
device you have connected using the HDMI. See “DVD
System Menu Options - Video Setup Page”.
– You need to switch to another frequency channel to avoid
bandwidth interference by other wireless devices.
– To switch the frequency channel, press and hold the
SOUND key on the remote control for 5 seconds.
– You will see the channel numbers (1- 4) ashing on the
display panel of your DVD system.
Problem Solution
Troubleshooting (continued)