Filter
Top Products
46
English
Tuner Operations
Tuning to radio stations
A Press SOURCE button until “TUNER
FM” appears on the display panel.
B Press S / T brie y on the remote
control.
The display panel will show
“SEARCH” until a radio station with
suf cient signal strength is found.
C Repeat step B if necessary until you nd
the desired radio station.
D To ne-tune the reception of a weak
station, press . / > brie y and
repeatedly until an optimal reception is
found.
Helpful Hints:
– If the FM radio station is transmitting RDS
(Radio Data System) data, the RDS name
will be displayed and stored.
Presetting radio stations
You can store up to 40 FM preset radio
stations in the system’s memory. There
are three different ways to program the
radio stations:
– Using auto install (for rst time setup
only)
– Using automatic preset
– Using manual preset
Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no valid frequency is detected during
tuner installation, “PLEASE CHECK FM
ANTENNA” appears.
Using auto install
This feature is only applicable for the rst
time radio station programming. You will
be prompted for installing the radio
stations once you access the tuner mode.
With one touch of the button, all the
available radio stations will be stored
automatically.
AUTO INSTALL ....
INSTALL TUNER
1
2
A
B
A Press SOURCE on the system panel to
select TUNER mode.
“AUTO INSTALL PRESS PLAY”
appears.
B Press and hold u (PLAY PAUSE) on
the system panel until “INSTALL
TUNER” appears on the display panel.
All the available radio stations with
strong signal strength will be stored
automatically.
Once complete, the last tuned radio
station will be played back.
DVD System’s
display panel