Filter
Top Products
21
Record a section of a disc to
tape
1 During disc play, press and hold / to
search, then release the button.
To select a track, press •
/ .
2 Press to pause disc play.
3 Press to start recording.
Disc play resumes automatically.»
To pause recording, press •
. To
resume, press this button again.
To stop recording, press •
.
Record from radio to tape
1 Tune to the desired radio station .
2 Pull the handle beside PULL TO OPEN
on the front panel to open the tape
button cover.
3 Press to open the tape door.
4 Load a tape.
5 Press to start recording.
To pause recording, press •
. To
resume, press this button again.
To stop recording, press •
.
7 Record
Note
To record, use only “Normal” (IEC type I) tapes •
on which the write-protect notches (tabs) are not
broken.
Tip
When you play or record a tape, the sound source •
cannot be changed.
The best recording level is set automatically.
•
Change of volume and sound effect does not affect
recording.
Note
The quality of recorded sound can differ depending •
on the source and the tape used.
Auto record from CD to
tape
1 Press DISC to select disc source.
2 Load a disc.
3 Pull the handle beside PULL TO OPEN
on the front panel to open the tape
button cover.
4 Press to open the tape door.
5 Load a tape.
6 Press to start recording.
Disc play starts automatically from the »
beginning of the disc.
To pause/resume recording, press •
.
To stop recording, press •
.
English
EN