Filter
Top Products
27
Set the sleep timer
This DVD Micro Theater can switch to standby
automatically after a set period of time.
1 When the DVD Micro Theater is turned
on, press SLEEP repeatedly to select a set
period of time (in minutes).
When sleep timer is activated, the »
display shows
.
To deactivate sleep timer
1 Press SLEEP repeatedly until “ [OFF]” is
displayed.
When sleep timer is deactivated, »
disappears on the display.
Listen to an audio device
You can listen to an audio device through this
DVD Micro Theater.
1 Connect a 3.5mm audio cable from the
MP3 LINK socket to the audio output
socket audio device.
2 Press MP3 Link.
3 Start to play the device (see the device
user manual).
10 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
1 Ensure that you have set the clock
correctly.
2 In standby mode, press and hold TIMER.
3 Press DISC, TUNER or USB to select a
source.
4 Press TIMER to confi rm.
The hour digits are displayed and begin »
to blink.
5 Press / to set the hour.
6 Press TIMER to confi rm.
The minute digits are displayed and »
begin to blink.
7 Press / to set the minute.
8 Press TIMER to confi rm.
The timer is set and activated.»
Activate and deactivate alarm timer
1 Press TIMER repeatedly to activate or
deactivate timer.
If timer is activated, the display shows »
.
If timer is deactivated, »
disappears on
the display.
Note
Alarm timer is not available in MP3 LINK mode.•
If DISC/USB source is selected and the track cannot •
be played, tuner is activated automatically.
English
EN