Filter
Top Products
30
Remote control does not work
Before pressing any function button, fi rst •
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote •
control and the DVD Micro Theater.
Insert the battery with its polarities •
(+/– signs) aligned as indicated.
Replace the battery.•
Aim the remote control directly at the •
sensor on the front of the DVD Micro
Theater.
No disc detected
Insert a disc.•
Check if the disc is inserted upside down.•
Wait until the moisture condensation at •
the lens has cleared.
Replace or clean the disc.•
Use a fi nalized CD or correct format disc.•
The DVD player does not respond when
buttons are pressed.
Disconnect the power plug from the jack, •
and insert again.
No image is output when a function is
selected.
Make sure the component is connected •
correctly.
Press the correct function button for the •
input source.
Recording or playback cannot be made
Clean deck parts.•
Use only NORMAL tape.•
Apply a piece of adhesive tape over the •
missing tab space.
The language for the sound or subtitle cannot
be changed during DVD playback.
Multi-language sound or subtitle is not •
recorded on the DVD.
Changing the language for the sound or •
subtitle is prohibited on the DVD.
12 Troubleshooting
Caution
Never remove the casing of this DVD Micro Theater. •
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
DVD Micro Theater, check the following points
before requesting service. If the problem
remains unsolved, go to the Philips web site
(www.Philips.com/support). When you contact
Philips, ensure that your DVD Micro Theater
is nearby and the model number and serial
number are available .
No power
Ensure that the AC power plug of •
the DVD Micro Theater is connected
properly.
Ensure that there is power at the AC •
outlet.
As a power-saving feature, the DVD •
Micro Theater switches to standby
automatically 15 minutes after disc/USB
play reaches the end and no control is
operated.
No sound or poor sound
Adjust the volume.•
Disconnect the headphones.•
Check that the speakers are connected •
correctly.
Check if the stripped speaker wires are •
clamped.
Left and right sound outputs reversed
Check the speaker connections and •
location.
No response from the DVD Micro Theater
Disconnect and reconnect the AC power •
plug, then turn on the system again.
EN