Filter
Top Products
19
English
Program radio stations
manually
Note
• You can program a maximum of 20 preset
radio stations.
1 Tune to a radio station.
2 Press PROG/CLOCK SET to activate
programming mode.
3 Press / to select a number from
1–20 for this radio station, then press
PROG/CLOCK SET to program the
current radio station.
» The preset number and the frequency
of the preset station are displayed.
4 Repeat steps 2-3 to program other
stations.
Note
• To overwrite a programmed station, store
another station in its place.
Tune to a preset radio station
1
Press FM.
2 Press / to select a preset number.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1 Tune to an RDS station.
2 Press RDS/INFO repeatedly to scroll
through the following information (if
available):
» Station name
6 Listen to FM
radio
Tune to FM radio stations
Note
• Ensure that you have connected and fully
extended the supplied FM antenna.
1 Press FM.
2 Press and hold / to tune to a radio
station.
3 When the frequency starts to change,
release the button.
» The FM tuner tunes to a station with
strong reception automatically.
4 Repeat steps 2-3 to tune to more
stations.
To tune to a weak station:
Press
/ repeatedlyuntilyoundoptimal
reception.
Program radio stations
automatically
Note
• You can program a maximum of 20 preset
radio stations.
1 In FM tuner mode, press PROG/CLOCK
SET for 3 seconds to activate automatic
programming.
» [AUTO] (auto) is displayed.
» The unit stores all the FM radio
stations automatically and then
broadcaststherstpresetradio
station.
EN
MCD2010_12_UM_Book1_V3.2.indb 19 8/10/2012 9:40:03 AM