Philips MCD300/93 DVD Player User Manual


 
59
English
Disc Operations
Playing JPEG Picture CD
IMPORTANT!
Make sure that the system is properly
connected to your TV (see Connecting a
TV on page 42), and your TV is turned on
and set to video-in channel (Setting up
the TV on page 47).
1 Load a JPEG Picture disc.
After several seconds of disc loading, pictures will
be automatically slide showed on the TV screen
at an interval of 4-5 seconds.
Slide show will continue until all the pictures
are slide showed.
The display on the system shows JPEG, and
the number of pictures already slide showed.
To exit slide showing
Press DISC MENU.
The file list appears on the TV screen.
Or,
Press 9.
12 thumbnail pictures appear on the TV
screen.
Previewing pictures (JPEG)
JPEG pictures can be previewed by using either
of the following ways.
1 During slide show, press DISC MENU.
The file list appears on the TV screen.
2 Use 3 4 or Numeric Keypad (0-9) on the
remote control to highlight a file.
The selected picture will be previewed in
thumbnail on the TV screen.
To slide show, press OK when a picture is
highlighed.
Slide show will start from the selected
picture.
Or,
1 During slide showing, press 9.
12 thumbnail pictures appear on the TV screen.
2 Use 1 2 3 4 to highlight 1Prev or Next2 ,
then press OK to go to the previous or next
screen.
To slide show, press OK when a picture or
Slide Show is highlighted by using 1 2 3 4.
Zooming pictures (JPEG)
During slideshow, press ZOOM repeatedly to
display a picture at enlarged sizes (125%, 150%
or 200%) or reduced sizes (75% or 50%).
Use 1 2 3 4 to pan across the enlarged
picture.
Slide show is paused at a zoomed picture,
and slide show will resume when the zoomed
picture is adjusted to the normal size.
Rotating pictures (JPEG)
During slideshow, press 1 2 3 4 to rotate a
picture on the TV screen.
3: flip a picture vertically
4: flip a picture horizontally
1: rotate a picture anti-clokwise
2: rotate a picture clokwise
Slide show playback modes (JPEG)
During slideshow, press PROG repeatedly to
select different slide-show playback modes in the
sequence as follows:
Mode 0: None
Mode 1: Wipe Top
Mode 2: Wipe Bottom
Mode 3: Wipe Left
Mode 4: Wipe Right
Mode 5: Diagonal Wipe Left Top
Mode 6: Diagonal Wipe Right Top
Mode 7: Diagonal Wipe Left Bottom
Mode 8: Diagonal Wipe Right Bottom
Mode 9: Extend From Center H
Mode 10: Extend From Center V
Mode 11: Compress To Center H
Mode 12: Compress To Center V
Mode 13: Window H
Mode 14: Window V
Mode 15: Wipe From Edge To Center
Mode 16: Move In From Top
p038-p071_MCD300_Eng 2005.11.3, 16:3459