Filter
Top Products
12
English
Connections
Step 2: Connecting speakers
1
2
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", coloured (marked) wire to "+" and black
(unmarked) wire to "-". Fully insert the stripped
portion of the speaker wire into the terminal as
shown.
Notes:
- Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
-For optimal sound performance, use the
supplied speakers.
- Do not connect more than one speaker to any
one pair of +/- speaker terminals.
-Do not connect speakers with an impedance lower
than the speakers supplied. Please refer to the
SPECIFICATIONS section of this manual.
Step 3: Antennas Connection
Connect the supplied MW loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
MW Antenna
● Position the antenna as far as possible from a TV,
VCR or other radiation source.
FM Antenna
● For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
pg001-pg040_MCD510_21-Eng 2005.10.28, 9:2512