Filter
Top Products
English
17
Controls
Controls on the system
1 ECO POWER/STANDBY-ON y
– to switch the system on or to Eco power/normal
standby mode.
2 Display screen
– to view the current status of the system.
3 SOURCE
– to select the respective sound source : DISC
TUNER, TAPE or AUX.
4 BAND / DISPLAY
for Tuner ............. to select waveband : FM or MW.
for DVD/VCD/CD/MP3-CD displays disc
information on the TV screen
and system display panel during
playback.
5 PROGRAM
for VCD/CD/MP3-CD…to program disc tracks.
for Tuner ............. to program preset radio stations.
6 34 ALBUM/PRESET/TIMER SET
for MP3-CD ..... to select previous/next album.
for Tuner ............. to select a preset radio station.
*for Timer (3)..to set the timer function
7 TUNINGS T
*for DVD/VCD/CD................... to fast reverse/
forward the disc. (It is impossible to fast reverse /
forward for MP3-CD)
for DVD/VCD/CD/MP3 CD… to select a
desired track.
for Tuner ............. to tune to a lower or higher
radio frequency.
for Tape ............... to rewind or fast forward.
for clock/timer setting
................................. to adjust the hours and minutes
for the clock/timer functions.
8 Ta pe deck
9 OPEN/CLOSE ç
– to open the tape compartment.
0 ÉÅ
– to start or interrupt playback.
! 9
for DVD/VCD/CD/MP3-CD…to stop playback
or to clear a program.
for Tape ...............to stop playback or recording.
@ VOLUME
– to increase or decrease the volume.
# RECORD
– to start recording.
$ CLOCK SET
*for Clock.......... (on the system only) to set the
clock function.
% iR sensor
– infrared sensor for remote control.
^ OPEN•CLOSE ç
– to open or close the disc tray.
& DSC
– selects different types of preset sound equalizer
settings (JAZZ, ROCK, POP or OPTIMAL).
* DBB/INCREDIBLE SURROUND
– to create a super-enhanced stereo effect.
– to enhance the bass.
( n
– to connect headphones.
) MIC IN
– to connect microphone
¡ MIC VOL
– to adjust the mixing level for Karaoke
Controls on the remote control
1 y
– to switch the system on or to Eco power/
normal standby mode.
2 SOURCE
– to select the respective sound source : DISC
TUNER, TAPE or AUX.
3 Numeric Keypad (0-9)
– to enter a track/title number of the disc.
4 VOL +/-
– to increase or decrease the volume.
5 ALBUM-/+ 1/¡
– to select a fast playback speed forward and
backward.
– in the tuner mode, to tune to a higher or lower
radio frequency.
– to select a movement direction in the disc menu
or system menu bar.
* = Press and hold the button for more than two seconds.
pg001-pg040_MCD510_21-Eng 2005.10.28, 9:2517