Filter
Top Products
14
English
Connections
Using S-Video In jack
IMPORTANT!
– If the picture is distorted, check the
Video Output setting. Make sure it is set
to ‘S-Video’. (See Setting video
preference).
AUDIO
IN
3
R
LINE OUT
DIGITAL
OUT
L
RL
FM 75Ω
FM/MW ANTENNA
AM ANTENNA FM ANTENNA
2
1
1 Use the S-Video cable (not supplied) to connect
the system’s S-VIDEO OUT jack to the S-
Video input jack (or labeled as Y/C or S-VHS) on
the TV set.
2 To hear the sound of this DVD Player through
your TV, use the audio cables (white/red) to
connect LINE OUT (L/R) jacks of the DVD
Player to the corresponding AUDIO IN jacks on
the TV.
Using an accessory RF modulator
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
3
AUDIO IN
R L
VIDEO
IN
TO TVANT IN
CH3 CH4
2
1
RF coaxial cable to TV
Back of RF Modulator
(example only)
Antenna or
Cable TV signal
● Use the composite cable (yellow) to connect
the system’s CVBS jack to the video input jack
on the RF modulator.
● Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s RF jack.
pg001-pg040_MCD510_21-Eng 2005.10.28, 9:2514