Filter
Top Products
14
EN
Selecting the recording speed (SP
or LP)
LP allows to double the recording duration on tape
(for example six hours instead of three hours on an
E180 cassette).
1.
1.Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'RECORD SETUP' using
and confirm with
.
4.
4.Select 'RECORD SPEED' using
.
5.
5.Select the required recording speed with
.
6.
6.To end, press .
'Direct Record'
With Direct Record, you can record the right TV
channel in seconds even if your video recorder is
switched off. If the recording is started manually,
the video recorder uses the current TV channel
set on the TV.You will find more information on
how to switch 'Direct Record' on or off in the next
section. Make sure that your video recorder
socket (AV1/TV) and the TV are connected by a
scart cable.
1.
1.On the TV, select the programme number you
want make the recording from.
2.
2.Press with the video recorder
switched off.
3.
3.Stop recording with .
Switching 'Direct Record' on or off
1.
1.Switch on the TV.If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'RECORD SET UP' with
and confirm with .
4.
4.In 'DIRECT RECORD', select 'OFF' (Direct
Record off) or 'ON' (Direct Record on) with
5.
5.To end, press .
6.
6.Switch off with .
STANDBY/ON
yy
STATUS/EXIT
B1
B1
LCKB
MENU
LC
RECORD/OTR I
STATUS/EXIT
B1
LCKB
B1
LC
KB
MENU
SP'/'LP'
'SP': StandardPlay (normal recording speed) offers
the usual first-class picture quality.
'LP': LongPlay (half recording speed, double
recording time). 6 hours can be recorded on a 3-
hour cassette (E180) with a somewhat reduced
picture quality.
SELECT KL CHOOSE B
→RECORD SPEED [SP]
DIRECT RECORD [OFF]
END=EXIT
How does Direct Record work?
The video recorder compares the TV channel
selected on the TV set with its stored TV channels
via the scart cable. If the same TV channel is
found, it switches the video recorder to the corre-
sponding programme number and starts recording.
Please do not change the TV channel on the TV
set during the search so as not to affect the
process.
SELECT KL CHOOSE B
RECORD SPEED [SP]
→DIRECT RECORD [OFF]
END=EXIT
VR330/07.qx3 02.2.6 10:10 AM Page 14