Filter
Top Products
17
EN
Problems and solutions for pro-
grammed recordings
How to check, or delete a pro-
grammed recording (TIMER)
1.
1.Switch on the TV.If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'TIMER' with .Then press
.
4.
4.Select 'TIMER LIST' with , and
confirm with
.
5.
5.Select timer block with .
6.
6.To cancel the recording, press .
7.
7.To end, press
.
8.
8.Switch off with with
.
How to change a programmed
recording (TIMER)
1.
1.Switch on the TV.If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'TIMER' with .Then press
.
4.
4.Select ONCE, DAILY, or WEEKLY recording
with .Then press .
5.
5.
Select a TIMER block with . (The flashing
number indicates an empty TIMER block.)
6.
6.Press
to delete information and input
correct information with
.
7.
7.To end, press
.
8.
8.
Switch off with
.
STANDBY/ON
yy
STATUS/EXIT
0..9
CLEAR
0..9
B1
LCKB
B1
LC
KB
MENU
STANDBY/ON
yy
STATUS/EXIT
CLEAR
B1
B1
LC
KB
B1
LC
KB
MENU
The video recorder does not react
• While a programmed recording is being made,
you cannot operate your video recorder manu-
ally.If you want to cancel the programmed
recording, press .
• The end of the tape was reached during
recording.
Switch off the video recorder with
.A programmed recording (timer) will only func-
tion if the video recorder is switched off.
'TURN OFF VCR FOR TIMER RECORDING'
appears on the screen
* The video recorder was switched on several
minutes before the start of a programmed
recording.
'' will flash in the video recorder display
* No cassette was inserted. Insert a cassette and
switch off the video recorder using
.
Cassette is ejected during recording
* The end of the tape was reached during
recording.
The 'PROTECTED CASSETTE CANNOT
RECORD' error message appears briefly in
the screen then the cassette is ejected
* A cassette was inserted with the security tab
removed.
Undo the erase protection (chapter 'Manual
Recording', section 'Preventing accidental eras-
ing of cassettes') or insert a different cassette.
STANDBY/ON
yy
STANDBY/ON
yy
C/
AA
SELECT KL CHOOSE B
ONCE
DAILY
WEEKLY
→TIMER LIST
END=EXIT
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
VR330/07.qx3 02.2.6 10:10 AM Page 17