Filter
Top Products
16
EN
5.
5.The decoded data appears after confirma-
tion.You can go back to change the data.
Select the corresponding input field using
. Change the data with .
6.
6.When all information are correctly, press
.The programming information
is stored in a TIMER block.
7.
7.Insert a cassette with an intact security tab
(unprotected).
8.
8.Switch off with .The pro-
grammed recording will only function when
the video recorder is switched off with
.
If any of the TIMER blocks are in use, ' REC' will
light up on the video recorder display.
Problems and solutions for pro-
grammed recordings
Programming a recording (without
VIDEO Plus+)
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'TIMER' with .Then press
.
4.
4.Select ONCE, DAILY, or WEEKLY recording
with .Then press .
If any of the TIMER blocks are in use, 'FULL' will
appear on the TV screen.
5.
5.Select TIMER block with .
6.
6.With buttons you can enter 'START'
(start time) , 'STOP' (end time) , 'PROG.' (pro-
gramme number) ‘VPS/PDC’ and 'DATE'.
7.
7.When all inputs are correct, press
.The programming information
is stored in a TIMER block.
8.
8.Insert a cassette with an intact security tab
(unprotected).
9.
9.Switch off with .
The programmed recording will only function
when the video recorder is switched off with
.
STANDBY/ON
yy
STANDBY/ON
yy
STATUS/EXIT
0..9
0..9
B1
LCKB
B1
LC
KB
MENU
STANDBY/ON
yy
STANDBY/ON
yy
STATUS/EXIT
0..9CLEAR
B1
Switching on 'VPS/PDC' in the 'START' input
field
Select 'VPS/PDC' using .Press '1'
to switch off 'VPS/PDC' or press '2' to switch on
'VPS/PDC'.
CLEAR
B1
The video recorder will not operate
* While a programmed recording is being made,
you cannot operate your video recorder manually.
If you want to cancel the programmed recording,
press .
'TURN OFF VCR FOR TIMER RECORDING'
flashes on the TV screen
* The video recorder was switched on several min-
utes before the start of a programmed recording.
Switch off the video recorder with .
A programmed recording (timer) will only function
if the video recorder is switched off.
Cassette is ejected during recording
* The end of the tape was reached during record-
ing.
Error message: ' ' will flash in the video
recorder display
* No cassette was inserted. Insert a cassette and
switch off the video recorder using
.
Cassette was ejected as soon as the
button was pressed
* A cassette was inserted with the security tab
removed.
Undo the erase protection (chapter 'Manual
Recording', section 'Preventing accidental erasing
of cassettes') or insert a different cassette.
STANDBY/ON
yy
STANDBY/ON
yy
STANDBY/ON
yy
C
/
A
Error message: 'FULL'
* If this error message appears after pressing
, then all TIMER blocks are already pro-
grammed. No more recordings can be pro-
grammed. If you want to clear a programmed
recording (TIMER block), select the programme
number on TIMER LIST menu and press .
CLEAR
SV/V
+
SELECT KL CHOOSE B
→ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Selecting once/daily/weekly recordings
Use to select from the following options:
'ONCE': Recording once
'DAILY':Repeated daily recordings from Monday to
Friday
'WEEKLY.': Repeated weekly recordings (every
week on the same day)
LCKB
Programme numbers of the ' AV/IN ' and scart
socket
You can also programme recordings from external
sources via scart socket AV/IN.
VR330/07.qx3 02.2.6 10:10 AM Page 16