Philips PDCC-ZYL-0906 DVD Player User Manual


 
English
11
Using Headphone jack
To listen to TV through this system, use a cinch
cable (not supplied) to connect AUX IN jack
(3.5mm) to the HEADPHONE jack on the TV
set (with a 3.5mm-diameter stereo jack).
Or, you may use a cinch calbe (not supplied) to
connect AUX IN jack (3.5mm) to audio out
jacks on the TV set.
Before starting operation, press AUX on the
remote control to select “AUX ” in order to
activate the input source.
Step 3: Connecting TV set
IMPORTANT!
–You only need to make one video
connection from the following options,
according to the capabilities of your TV
system.
S-Video connection provides higher
picture quality. This option must be
available on your TV set.
Connect the system directly to the TV
set.
Using Video In jack (CVBS)
Use the supplied composite video cable (yellow)
to connect the system’s COMPOSITE
VIDEO jack to the video input jack (or labeled
as A/V In, Video In, Composite or Baseband) on
the TV set.
To hear the sound of this DVD Player through
your TV, use the audio cables (white/red,
supplied) to connect LINE OUT (L/R) jacks of
the DVD Player to the corresponding AUDIO
IN jacks on the TV.
Connections
pg001-021_MCD179_12_Eng 2/5/09, 10:3411