Filter
Top Products
Q
N.OhW that you have looked up
e three-digit Remote
Code Number for your brand of
accessory device (see page 45-
46), you are ready tofollow the
simple steps shown below.
Please read through all the
steps before beginning,
Press and release the correct
I VCR or ACC(essory) System
button.
<_ Press and release the center
I Menu button.
<_ Within seconds after
thirty
releasing the center Menu
button, ENTER THE THREE
DIGIT CODE NUMBER for
the desired device. The_emote
is now ready to send commands
to the accessory.
<_ Point the remote at the
lacc°ryorte
POWER button on the remote to
turn the device ON.
Remember, if this does
lot work the first time,
repeat steps using the same remote
code number.
If after a second try the remote
does not operate your accessory
device, and there are more code
numbers listed for your brand, use
the next listed code number.
If after repeated attempts the code
number method does not work
your accessory device, try the
"SEARCH METHOD" shown on
the following page.
q}®®
®®®
®®®
@
Note: For TV remote's equipped
with a backlight option, the unit may
"blink'* or flash as the three-dlgit
Direct Access code ntttnbers are
entered on the keypad. (Two blinks
indicate a valid code number entry
has been accepted; one long blink
indicates an invalid code number or
the thirty second time intetwal for
entering code numbers has expired.)
45