Filter
Top Products
_ae fOllowing example is for an
lternative PIP connection
hookup using an external Cable
Converter Box and a VCR (as the
picture source for the PIP
window).
First use an optional signal
splitter and connect the original
cable TV signal to both the
CABLE IN on the Cable Converter
and the ANTENNA A plug on the
rear of the TV.
Connect the CABLE OUT on
the Converter to the ANT. IN on
the VCR.
Connect the VIDEO OUT jack
on the VCR to the VIDEO IN
jack on the TV.
Also connect the AUDIO OpUT(R
and L)jacks from the VCR to the
AUDIO IN jacks on the TV.
SIGNAL
SPLITTER
Contact thepartsInformation
Center I 800 851-8885
to orderany optionalaccessories
®
REAROFTV
Remember
to use the Cable 'IV
Converter Box to
select channels for
PIP, the VCR must
be set to the same
channel as the
channel selection
switch on the rear of
the Cable Converter
or
The ANTENNA A signal input supplies the TV's
Main screen picture, and the AUX I VIDEO Input
connection from the VCR serves as the picture
source for PIP. Be sure to set the TV's PIP
SOURCE SELECT control to the "AUX l
VIDEO" mode in order to display the AutiioNideo
Input signals within the PIP window.
AUDIO VIDEO CABLES
(RCA Plug Cables - optional)
VCR
CABLE TV CONVERTER
55