Philips 55PW9363 Projection Television User Manual


 
58
MODEL
SPECIFICATIONS
Appendix B
B
A
ppendix
Product Type
Rear-projection HDTV Monitor
Television System
NTSC standard
Channel Coverage
VHF: 2–13
UHF: 14–69
Cable TV: Midband
Superband
Hyperband
Ultraband
Ambient Operating Temperature
+41 to 113ºF (+5 to +45ºC)
Mains Voltage
AC 110 ±10%
Power Consumption
180W (average)
Standby Power
<1W
Audio
Frequency response: 20Hz–15kHz, +1/–3dB (ampl.)
Stereo output with 2 x 10W RMS
Tw o, 4 x 6” speakers
Video/Audio Terminals
INPUT-AV 1
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
COMPONENT VIDEO INPUTS (YPbPr)
Y INPUT: 1.0Vp-p (includes sync), 75 ohms
Pb INPUT: 700mVp-p, 75 ohms
Pr INPUT: 700mVp-p, 75 ohms
(The Pb INPUT jack can also receive signals from outputs
labeled Cb or B-Y. The Pr INPUT jack can also receive sig-
nals from outputs labeled Cr or R-Y.)
S-VIDEO INPUT (INPUT-AV 1, INPUT-AV2, side panel)
Y-INPUT: 1 Vp-p (includes sync), 75 ohms
C-INPUT: 300 mVp-p, 75 ohms
INPUT-AV 2
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AV 4
Component Video YPrPb/RGB (See page 57)
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AV 5
Digital Video Interface (DVI) (See page 57)
AUDIO: 500 mVrms, 30 kohm
VIDEO/AUDIO OUTPUT
VIDEO: 1 Vpp, 75 ohms
AUDIO: Fixed: 500 mVrms into ˙10 kohm
Variable: 0–2 Vrms into ˙10 kohm
Side Panel (AV3)
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HEADPHONE: 1.5 Vrms, 16 ohm
Picture Visible Area
51PW9363: 51”
55PW9363: 55”
60PW9363: 60”
Product Dimensions (W” x H” x D”)
51PW9363: 49 x 55.1 x 24.3
55PW9363: 52.6 x 57 x 25.6
60PW9363: 56.7 x 59.4 x 27
Product Weight (lbs)
51PW9363: 184
55PW9363: 190
60PW9363: 210
Supplied Accessories
Remote control with two size “AA” batteries.
Design and specifications are subject to change without notice.