Filter
Top Products
8
Connecting Accessory Devices to Your TV
PANEL
OVERVIEWS:HIGH-DEFINITION INPUTS
VIDEO
S-VIDEO
L
Pb
Pr
VIDEO
S-VIDEO
L
AUDIO
L
R
AUDIO
L
R
G/Y
R/Pr
B/Pb
V
H
SYNC
L
R
AUDIO
L
R
AUDIO
HD INPUT-AV 4
HD INPUT-AV 5
INPUT-AV 2OUTPUT
INPUT-AV 1
Y
ANTENNA IN 75Ω
DVI
2
1
What You Can Connect to the
High-definition Input Jacks
1
HD INPUT-AV 4—use to connect dig-
ital equipment with a 1080i or a 480p
signal output, such as HD receivers
(1080i or 480p) or DVD players with
progressive-scan capability (480p). You
can connect equipment with YPbPr
component video or RGB outputs to
the HD INPUT-AV 4 jacks. H and V
sync connections may or may not be
required for RGB connections. (See
page 59.) Dedicated audio input jacks
are located with the HD INPUT-AV 4
video jacks.
NOTE: The Picture-in-Picture (PIP)
feature is not available for use with AV 4.
2
HD INPUT-AV 5—use to connect digi-
tal equipment with DVI (digital video
interface) 1080i or 480p output. DVI is
a specific digital input allowing encrypt-
ed transmission of uncompressed HD
content. DVI includes HDCP (high-
bandwidth digital content protection),
which is supported by the motion pic-
ture industry, satellite providers, and
most of the consumer electronics indus-
try. DVI is gaining momentum and
quickly becoming an industry standard
for the consumer to view high-definition
material while keeping content protected.
NOTE: The Picture-in-Picture (PIP)
feature is not available for use with AV5.
• The TV’s default color-space setting for HD
INPUT-AV 4 is YPbPr. If the picture looks
grossly incorrect, try changing the color-space
setting on either the digital equipment or the
TV. For more information on setting the color
space on the digital equipment, see the equip-
ment’s directions-for-use manual. To set the
TV’s color space, see page 59 in this manual.
• This television is designed to be compatible
with high-definition signal standards 1080i
and 480p as specified by the Electronic
Industries Association standard EIA770.3.
Because output standards may vary by manu-
facturer, you may encounter some digital
equipment that will not properly display pic-
tures on the TV.
•The PIP (Picture-in-picture) feature
allows
you to tune to a program in the main window
and scan other channels in the PIP window.
From a single antenna or cable input, signals
are separated into two signals within the tele-
vision. The AV1, AV2, and AV3 inputs are
also available as PIP sources.
HELPFUL HINTS
Summary of signal compatibilities
TV Input
Compatible output signal
from an external source
or device
HD INPUT-AV 4
1080i (1080 lines, interlaced) or
480p (480 lines, progressive scan)
HD INPUT-AV 5
Digital video interface (DVI) with
1080i (1080 lines, interlaced) or
480p (480 lines, progressive scan)
Because DVI is such new technology, the elec-
tronics industry is still working toward a deci-
sion on one standard. Philips testing has deter-
mined that compatibility issues exist with
respect to a limited number of high-definition
receivers when they are connected to the DVI
input on this television. If you should experi-
ence difficulties, please contact our Customer
Care Center at 1-800-531-0039.
HELPFUL HINT