Filter
Top Products
window
can come through either the
ANT(enna) A / B Inputs or the AUX
Video hzputs (on the rear and side
TV). PIP Picture Source
, tells the TV which one of
these sources it is to show in the
PIP window.
cfi-ff rm
> Select PIP SOURCE control.
With FEATURES MENU (4 of 5)
on screen, move the RED highlight
with the outer MENU ('_)
ring
buttons. Then press the center
MENU button to select the feature.
Note: The remote control's PIP
SOURCE button can also be used
to quickly select picture source
inputs on the rear of the TV for the
PIP window.
Press the MENU ring and
center MENU buttons to highlight
and select the desired (tt) PIP
Picture Source.
ANT A or B- for a picture signal
coming from either the ANT(enna)
A or B Input plug on the TV.
AUX 1 (or 2) VIDEO - for a
picture signal coming from the
AUX l (or 2) VIDEO IN jack on
the rear of the TV.
AUX 3 VIDEO - for a picture
signal coming from the SIDE
VIDEO Input jack on the right side
of the TV cabinet.
<_ Press the STATUS button
to
clear the screen.
@
Remember, the PIP
a window will be blank unless
a signal is connected to the
selected PIP Picture Source (ANT
B, AUX I VIDEO, AUX 2
VIDEO, etc.) on the set.
If you see the same picture on the
main screen and in the PIP
window, you may have the Main
Screen and PIP window set to the
same video input source.
MAIN MEN
%
®®®
®®®
®®®
e@e
FEATURE MENU
FEATURE MENU
REATURE MENU
_' , , ,
F_ATURIE MENU
40F5_
53