Philips DVD590M DVD Player User Manual


 
MUTE
DISPLAY
REPEAT REPEAT
SUBTITLE ANGLE ZOOM AUDIO
SEARCH
RETURN/TITLE
SYSTEM MENU
DISC MENU
EJECT
NEXTPREVIOUS
1
2
3
4
5
6
7
8
9
0
A-B
OK
2-4
If you used the Player’s Y PbCb PrCr jacks to connect to a TV, set SCAN
MODE correctly. This unit’s Video Output jacks send either regular
Component Video or Progressive Scan Video. Choose the setting that
matches the video compatibilities of your TV. Before you begin, make sure
VIDEO OUTPUT is set to CVBS/YCbCr. See details on page 34. No picture
will appear if the selected SCAN MODE does not match your TV connection.
In this case, always press EJECT / button, then numerical keypad “0”
repeatedly until the picture appears. If a disc was in the player it will eject.
1
Press Stop 9 twice to stop play completely, if necessary.
2
Press SYSTEM MENU, then press 1 or 2 repeatedly to select
the VIDEO menu.
3
Press 4 repeatedly to select VIDEO OUTPUT (CVBS/S-
VIDEO, etc.), then press 1 or 2 to choose CVBS/YPbPr, then
press OK.
4
Press 4 repeatedly to select SCAN MODE (INTERLACED),
then press 1 or 2 to choose INTERLACE or PROGRESSIVE,
then press OK.
Note:
Choose PROGRESSIVE only if your TV is set up for Progressive
Scan video. Otherwise, you will not have a DVD picture on the TV.
5
Press SYSTEM MENU to remove the menus.
TV OUTPUT NTSC
VIDEO OUTPUT CVBS/YPbPr
BRIGHTNESS
CONTRAST
SATURATION
SCAN MODE INTERLACED
TV OUTPUT NTSC
VIDEO OUTPUT CVBS/YPbPr
BRIGHTNESS
CONTRAST
SATURATION
SCAN MODE
DVD
VIDEOVIDEO
SYSTEM MENU : EXIT: MOVE : SELECT
TV OUTPUT NTSC
VIDEO OUTPUT CVBS/YPbPr
BRIGHTNESS
CONTRAST
SATURATION
SCAN MODE INTERLACED
TV OUTPUT NTSC
VIDEO OUTPUT
BRIGHTNESS
CONTRAST
SATURATION
SCAN MODE INTERLACED
SETUP : EXIT: MOVE : SELECT
DVD
VIDEOVIDEO
1
2,5
Scan Mode 35
If you lose the DVD picture because the
SCAN MODE setting is wrong, press
“EJECT A ”.Then press the Number “0”
button to reset the Video.The DVD image
should reappear on the TV screen.
Pressing “0” toggles the setting of SCAN
MODE between INTERLACED and
PROGRESSIVE only when Video Output is
set to “CVBS/YPbPr”. (if a disc was in the
player it will eject.)
Helpful Hint
DVD590M_17x 6/11/2003 1:42 PM Page 35