Filter
Top Products
Hookups (cont’d) 9
3
ANT IN
TO TV
AUDIO IN
RL
VIDEO
IN
CH3 CH4
Back of RF Modulator
(example only)
Antenna or Cable TV Signal
Back of TV
(example only)
ANTENNA IN
RF IN
DIGITAL
AUDIO OUTPUT
COAXIALVIDEOS-VIDEOPr/CrPb/CbY
L
R
MAINS
4
1
5
6
2
Before you begin, make sure you have an RF modulator and extra RF coaxial cables.
These are not supplied with the Player, but are available from Magnavox or most
consumer electronics retailers.
1
Connect the supplied video cable (which has yellow markings) to the Player’s yellow
VIDEO jack. Connect the other end of the cable to the VIDEO IN jack on the RF
modulator. The VIDEO IN jack on the RF modulator is usually yellow and might be labelled
VIDEO, CVBS, COMPOSITE, or BASEBAND.
2
Connect the supplied audio cable (which has white and red markings) to the
Player’s Audio L/R (left and right) jacks.
Connect the other ends of the audio cable to the AUDIO IN jacks on the RF
modulator. Audio jacks on the RF modulator usually are red (right) and white (left). Match the
cable colors to the jack colors.
3
You probably already have an Antenna or Cable TV signal connected to the ANTENNA IN jack
on your TV.
Disconnect it now from the TV. Reconnect the Antenna or Cable TV signal to the
ANTENNA IN jack on your RF modulator.
4
Connect an RF coaxial cable (not supplied) to the RF OUT,ANTENNA OUT, or TO
TV jack on the RF modulator. The RF OUT jack may be labelled differently among different
brands. Refer to the instructions provided with your RF modulator.
Connect the other end of the same RF coaxial cable to the ANTENNA IN or RF IN
jack on your Television.
5
Your RF Modulator should have a Channel 3/4 switch.The setting of this switch determines the
TV channel on which you will watch materials playing on the DVD Player.
Set the RF Modulator’s Channel 3/4 switch to either 3 or 4, whichever TV channel is
least used in your area. If your RF modulator has a Modulator/Antenna switch, set it
accordingly. Refer to the instructions that came with the RF Modulator.
Turn on your TV and choose channel 3 or 4. Choose the same channel to which you set
the RF Modulator’s Channel 3/4 switch. Make sure the RF Modulator is on.
6
Connect the supplied power cord to the MAINS ~ (AC Power) jack on the Player.
Connect the AC plug to a power outlet. Press
yy
on the Player or its remote to turn on
the Player.If no Disc is in the Player, you should see the Player’s blue background screen on the
TV screen.
Connecting to a TV Only
TV has only a single Antenna In or RF-In jack
DVD590M_17x 6/11/2003 1:42 PM Page 9