Filter
Top Products
30
Activating/Deactivating Parental
Control
1 When disc playback is stopped, select ACCESS
CONTROL in the Personal Preferences menu
using the 3/4 keys.
2 Enter your 4-digit code. If necessary, enter the
code a second time.
3 Move to Parental Control using the 3/4
keys.
4 Move to value adjustment (1-8) using the 2 key.
5 Then use the 3/4 keys or the numerical keys on
the remote control to select a rating from 1 to 8
for the disc inserted.
Rating 0 (displayed as ‘– –’):
Parental Control is not activated. The Disc will be
played in full.
Ratings 1 to 8:
The disc contains scenes not suitable for children.
If you set a rating for the player, all scenes with
the same rating or lower will be played. Higher
rated scenes will not be played unless an
alternative which has the same rating or lower is
available on the disc. If no suitable alternative is
found, playback will stop and the 4-digit code has
to be entered.
6 Press OK or 1 to confirm, then press 1 again to
exit the Personal Preferences menu.
Country
You can set the DVD player to block or allow
DVD playback according to the country rating
selected in the DVD.
1 When disc playback is stopped, select ACCESS
CONTROL in the Personal Preferences menu
using the 3/4 keys.
2 Enter the 4-digit code.
3 Move to CHANGE COUNTRY using the 4
key.
4 Press the 2 key.
5 Select a country using 3/4.
6 Press OK or 1 to confirm, then press 1 again to
exit the menu.
Changing the 4-digit code
1 When disc playback is stopped, select ACCESS
CONTROL in the Personal Preferences menu
using the 3/4 keys.
2 Enter the current 4 digit code.
3 Move to CHANGE CODE using the 4 and
press the 2 key.
4 Enter the new 4-digit code.
5 Enter the code a second time and reconfirm by
pressing OK.
6 Press 1 to exit the menu.
➜ The new 4 digit code will be take effect.
If you forget your 4 digit code
1 Press 9 to exit the ‘Child Safe’ screen.
2 Select ACCESS CONTROL in the Personal
Preferences menu using the 3/4 keys.
3 The 4-digit code can be cancelled by pressing 9
four times in the ‘Access Control’ dialog.
4 You can then enter a new code (twice!) as
described above in ‘Changing the 4 digit code’.
Parental Control Disclaimer
This DVD/SACD player features the
PARENTAL CONTROL system which is to
activate when playing DVD discs furnished with
certain software coding only.
Also note that at the time of release of this
DVD/SACD player, certain aspects of the
technical standards had not been settled
between set makers and the disc industries.
On this basis, Philips cannot guarantee the
functioning of the PARENTAL CONTROL
system and denies any liability associated with
unintended watching of disc content.
If in doubt, please make sure the disc plays
according to your PARENTAL CONTROL
settings before you allow children access to the
player.
Access Control