Philips 27MDTR20 DVD VCR Combo User Manual


 
28 One-Touch Recording
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
2
4
1
3
Press REC/OTR I on the
front of the TV/VCR/DVD.
A One-Touch Recording (OTR) is an immediate timed
recording from 30 minutes to 8 hours long.
Before you begin ...
Turn on the TV/VCR/DVD.
Press SELECT to put the unit in TV/VCR mode.
The red VCR/TV light will appear on the front of the unit.
Insert a videotape with its erase prevention tab in place.
Details are on page 8.
1
Press the Number buttons or CH. /to select
the channel you want to record.
Remember, if the TV/VCR/DVD is connected to a
Cable Box/Satellite Receiver, the TV/VCR/DVD must
be on channel 3, 4 or AUX.
Select the channel you want to record at the Cable
Box/Satellite Receiver. Details are on page 9.
2
Press SPEED to select a tape recording speed
(SP or SLP). Details are on page 27.
3
Press REC/OTR I on the front of the
TV/VCR/DVD repeatedly to select a recording
length. Recording will start immediately.
Each press of REC/OTR I will increase the recording
time by 30 minutes.The maximum recording length is
8 hours.
4
Press STOP C to stop a one-touch recording
before its designated end time. Otherwise,
recording will stop at the time you designated.The
TV/VCR/DVD will turn off when the OTR ends.
OTR (2:30)
SP
•You cannot start an OTR with
the RECORD button on the
remote control.
•To show the remaining
recording time, press DISPLAY.
OTR and the remaining
recording time will appear
briefly in the top left corner of
the screen.
If the tape ends before the
recording’s end time, the
TV/VCR/DVD will stop
recording, eject the tape, and
turn itself off.
An OTR will continue even if
you turn off the TV/VCR/DVD.
The flashing REC/OTR light
indicates the recording is still in
progress.
•To change the recording length
while an OTR is in progress,
press REC/OTR I repeatedly.
•You cannot pause an OTR.
If the preset time for a timer
recording comes up during an
OTR, the OTR has priority.The
timer recording will not take
place.
Helpful Hints
T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 28