Filter
Top Products
Multi-Channel Television Sound (MTS) 49
You can set the TV/VCR/DVD to receive or record TV
programs in Stereo, Second Audio or Monaural Sound. Also,
you can set the TV/VCR/DVD to play videotapes in either
High Fidelity (HIFI) or Monaural (MONO or single-channel)
sound. See pages 50-51 on how to set the sound mode.
1
Press DISPLAY to see the sound status. During
TV viewing, press DISPLAY twice. During tape
playback, press DISPLAY once.
When a TV program is broadcast in stereo, STEREO
appears in the top right corner of the screen.When a
TV program is broadcast in second audio, SAP appears
in the top right corner of the screen.When a TV
program is broadcast both in stereo and second audio,
STEREO and SAP both appear.
Although a program may be broadcast in both stereo
and second audio, you cannot record in both stereo
and second audio at the same time.
During tape playback, HIFI will appear in the top left
corner of the screen if VCR AUDIO is set to HIFI.
Details are on page 50. If you play non-HIFI tapes while
VCR AUDIO is set to HIFI, HIFI will disappear from
the screen.The videotape will play in monaural sound.
You must set the TV/VCR/DVD to record in either
STEREO or SAP. Do this by changing the TV AUDIO
setting as described on page 51.
STOP
HIFI
SP COUNT
12:00AM
CH 123
STEREO/SAP
0:00:00
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
1
T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 49