Philips 27MDTR20 DVD VCR Combo User Manual


 
•If you enter the wrong code in
the CONFIRM CODE space,
repeat step 5. Enter the same
new code exactly in the
CONFIRM CODE space.
•If you unplug the power cord
or if the power fails, the default
code will be active again (0000).
Change your access code again
as necessary.
Helpful Hints
48 Setting V-Chip (cont’d)
Changing the Access Code
Although the default code 0000 is supplied with the
TV/VCR/DVD, you can set your own access code.
1
Press SETUP.
2
Press or to select V-CHIP SET UP.
Then, press ENTER.
3
Press the Number buttons to enter the old
access code. When doing this for the first time, use
0000. 4 Xs will appear instead of the code to protect
its identity.
4
Press or to select CHANGE CODE.
Then, press ENTER.
5
Press the Number buttons to enter your
preferred access code in the NEW CODE
space.Then, enter the same code in the
CONFIRM CODE space. Again, Xs will appear
instead of the code numbers.The access code must
have exactly 4 digits.
The V-CHIP SET UP screen will reappear.
6
Press SETUP to save your settings and remove
the menus.
NEW CODE
CONFIRM CODE
X X X X
– – – –
– V-CHIP SET UP –
TV RATING
MPAA RATING
CHANGE CODE
B
ACCESS CODE
– – – –
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
2,4
1,6
3,5
T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 48