Filter
Top Products
11
CONNECTIONS
There are five steps to connecting the Set Top Box.
1. Connect the Set Top Box to the source of your pro-
gramming (cable TV signal, cable box, or antenna).
2. Connect the Set Top Box to your audio and video
equipment (TV, VCR, or stereo).
3. Connect the phone line to the Set Top Box.
4. Connect and position the IR Blasters.
5. Connect the Set Top Box to power.
When necessary, refer to the manuals for your TV, VCR,
stereo or other equipment to determine the best connec-
tions in your situation.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK AND
DAMAGE TO YOUR EQUIPMENT, ALWAYS UNPLUG
THE POWER CORD BEFORE CHANGING
CONNECTIONS ON THE SET TOP BOX.
Connect the cable signal (coming
from the wall) to the RF IN jack on the
back of the Set Top Box.
SOURCE IS A CABLE BOX
Connect the cable signal (coming from the wall) to the IN
jack on the Cable Box.
Connect a coaxial cable to the OUT jack on the Cable
Box and to the RF IN jack on the back of the Set Top Box.
SOURCE IS AN ANTENNA
Connect the antenna wire to the RF
IN jack on the back of the Set Top Box.
STEP ONE: CONNECTING AN ANTENNA OR CABLE TV SIGNAL
Choose the STEP ONE diagram that best matches the source of your TV programs.
SOURCE IS CABLE