Philips PRI39IXI CRT Television User Manual


 
E2
-- l" ped along with the Clock fea-
_" lures, you can select a specific
channel that the television will tune
to when the Tinter Active control is
turned ON.
<_ Press the CLOCK button to
display the Clock onscreen menu.
<_ Press the CURSOR UP or
CURSOR DOWN button until
the word CHANNEL is highlighted.
_ Press the number buttons to
enter the start up channel you
would like the television to start on.
@
<
S_T_ 10:00 AM
TIMER ACTM_ ON
[CHANNEL 12[
START TIM_ - : -- AM
®
®
l
Remember: Be sure to set
a the Timer Active control to
ON.
The onscreen menu will time out
and disappear from the screen when
you finish, or you can press the
STATUS/EXIT button to clear the
menu from the screen.
U_ed along with the Clock fea-
ure, you can select a specific
time the television will turn on
when the 7_mer Active control is
turned ON.
c-a-ff m
<_ Press the CLOCK button to
display the Clock onscreen menu.
_ Press the CURSOR UP or
CURSOR DOWN button until
the words START TIME arehigh-
ghted.
<_ Enter the time to turn on the
TV using the NUMBERED but-
tons. If the first number is a single
digit first enter a zero then _h,,edigit
( .e., press 0 , then press 8 ).
4_ Press the CURSOR RIGHT
or CURSOR LEFT buttons to
set ether AM orPM time.
TIMER _ ON
CHANNEL 12
ISTmT_ME --:--AM I
Remember: Be
g sure to set the Timer
Active to ON.
The onscreen menu will
time out and disappear
from the screen when you
finish, or you can press the
STATUS/EXIT button to
clear the menu from the
screen.
II'the TV is in use when the S'IART "rIME control is about I
to be activated, the screen will display a warning stating it's
I
going to change channels in 30 seconds. It will appear like
count down will cancel the change.
the screen shown below and change to the selected stari up
channel. Pressing any button on the remote within this
20