Filter
Top Products
3
Key Charts
1
Red Indicator Light
The Red Indicator Light blinks to show
that the remote control is working and
also provides feedback during program-
ming sequences.
2
Component Keys
Press TV,VCR,CBL,AUD,DSS,or CDonce
to select a home entertainment compo-
nent to control.
3
DSS Directional Pad
Use the pad to move the cursor in the
program guide and menu screens.
4
MENU Key
Press MENU to access the menu of your
chosen component.
5
SELECT Key
Use SELECT to choose options from your
selected component’s menu or guide.
6
GUIDE Key
Use GUIDE to display the programming
guide for your components (if applicable).
7
EXIT Key
Use EXIT to exit out of the selected com-
ponent’s menu or guide.
8
POWER Key
Press POWER once to turn on or offthe
selected home entertainment component.
9
VOL Keys
Use VOL + (or VOL -) to raise (or lower)
the sound volume.
0
CH Keys
Use CH + (or CH-) to select the next
higher (or lower) channel for the selected
home entertainment component.
q
MUTE Key
Press MUTE once to turn sound off or on.
w
SLEEP Key
Press SLEEP to activate your TV’s internal
sleep timer.(Not available for all TVs.)
e
LIGHT Key
Press LIGHT once to turn on or off the
keypad back light.
r
LAST Key
Press LAST once to recall the last channel
and to page back one screen in the
main menu.
t
L1~ L3 Keys
Use the learning keys, L1~L3, to store
and recall additional remote control
functions.
y
FC1 And FC2 Keys
User-programmable Favorite Command
Keys (see page 9 for details).
u
MCP Key
Multiple-component On/Off Key (see
page 9 for details).
i
Keypad
Use the keypad (0~9) to directly enter
in channels (for example,09 or 31).The
keypad is also used for all programming
sequences,such as entering in your pro-
gramming codes.
o
SCAN Key
Press SCAN once to change channels every
3 seconds.Press it again to stop the scan.
p
ENTER Key
Press ENTER once after entering channel
numbers on some TV models.
a
VCR Transport Keys
Use the VCR Transport Keys to control
your VCR, as well as CD or DVD player.
Press REC twice to record a tape.
s
TV/VCR Key
Press TV/VCRonce to view VCR playback
or TV through the VCR.
d
SET Key
Use SET for all programming sequences.
Before using your new DSS remote control,
you will need to obtain and install new bat-
teries,as described on the next page.
Then you’ll also need to program the DSS
remote control with the correct code num-
bers for your specific components. See
instructions starting on page 5.
SETTING UP YOUR REMOTE CONTROL
KEYS AND FUNCTIONS (continued)
REM400 Manual Engl 12/28/99 12:01 PM Page 3