Philips SL-0433/05-1 DVD Player User Manual


 
13
Functional Overview
Front and Rear Panels
Audio Out (Left/Right)
– Connect to AUDIO inputs of an amplifier,
receiver or stereo system
Scart
– Connect to Scart input of a TV
YPbPr
– Connect to YPbPr input of a TV
IR
DIGITAL
MEDIA
READER
TV OUT
COAXIALOPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
CVBS
S-VIDEO
Y
PbPr
STEREO
L
R
Mains (AC Power Cord)
Connect to a standard AC outlet
COAXIAL (Digital audio out)
Connect to coaxial AUDIO input of a
digital audio equipment
OPTICAL (Digital audio out)
Connect to optical AUDIO input of a
digital audio equipment
S-Video Out
Connect to S-Video input of a TV
CVBS (VIDEO Out)
Connect to CVBS Video input of a TV
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
9 STOP
To stop playback
T NEXT
To search or select next chapter or track
2; PLAY/PAUSE
To start or interrupt playback
PREV S
To search or select previous chapter or
track
Digital Media Reader (Slot 2)
To slot in Compact Flash (Type 1) card
Digital Media Reader (Slot 1)
To slot in Secure Digital (SD), MultiMedia
Card (MMC), SmartMedia (SM) and
Memory Card (MC) card
STANDBY-ON B
To switch the DVD Player to Standby
mode or ON
Disc tray
OPEN/CLOSE /
Open/Close the disc tray
Display
Shows the current status of the DVD
Player
IR Sensor
Point the remote control towards this
sensor
See page 25 for Digital Media
Reader Operation